Foxtrot basic modules The principles of wiring the ETHERNET General principles of UTP cables installation: During the installation of cables, sharp bends should be avoided; the cable must not be broken e.g. in... Foxtrot basic modules Recommended UTP (FTP) cables for the ETHERNET Standard indoor installations, inside the control panel, etc., only require common UTP cables, which are a standard for structured networks. Both unshielded... Foxtrot basic modules Connecting straight-through and crossover UTP cables in the ETHERNET TP cables (twisted pair) are either straight-through (UTP patch cable) or crossover cables. The straight-through TP cable is the most common cable... Foxtrot basic modules ETHERNET PLC Foxtrot physical interface The Ethernet interface is fitted with a standard RJ-45 connector with a standard layout of signals. The connector is ready to use with common UTP patch... Foxtrot basic modules Ethernet interface on the PLC Foxtrot (interface, cables) As a standard, the basic module is fitted with the Ethernet interface, 10/100 Mbit, RJ-45 connector, see Chapter .1. Each physical Ethernet interface... Foxtrot basic modules MR-0158 – M-Bus slave interface, with galvanic isolation Module is no longer for sale. More details concerning the M-Bus interface, including examples of the MR-0158 submodule connection, can be found in... Foxtrot basic modules MR-0152 - PROFIBUS DP interface, with galvanic isolation The MR-0152 submodule allows the connection of PLC TECOMAT Foxtrot to the PROFIBUS DP network as a slave station (subordinate) at the data transfer rate... Foxtrot basic modules MR-0161 - CAN interface, with galvanic isolation The MR-0161 submodule allows the connection of PLC TECOMAT Foxtrot to CAN network with data transfer rates of 500, 250, 125, 50, 20 or 10 kBd. It can only... Foxtrot basic modules MR-0160 - 2x CAN interface, with galvanic isolation The MR-0160 submodule allows the connection of PLC TECOMAT Foxtrot to two CAN networks with data transfer rates of 500, 250, 125, 50, 20 or 10kBd. It can... Foxtrot basic modules MR-0124 - RS-422 interface, with galvanic isolation The MR-0124 submodule provides the conversion of the serial interface TTL signals to the galvanically isolated RS-422 interface. The interface allows a... … 15 16 17 18 19 20 21 22 23 …
English
