TCL2 modules SC-1102, an additional interface CAN module The SC-1102 module is a system communication module for expansion of the central unit by an additional port with CAN interface; the module contains one... TCL2 modules SC-1101, an additional RS-232 and RS-485 interfaces The SC-1101 is a system communication module for the extension of the central unit by another serial communication channel supporting the UNI and PC modes;... TCL2 modules Connecting Thermona boilers with the OpenTherm interface An example of connecting a Thermona boiler fitted with the IU05 interface module. This interface makes it possible to implement a boiler cascade via its... TCL2 modules UC-1204, communication with the boiler with the OpenTherm interface The UC-1204 module is designed to connect the equipment (a boiler) communicating via a two-way protocol OpenTherm with the Foxtrot basic module. The... TCL2 modules UC-1203, a module for connecting the MP-Bus actuators The UC-1203 module is used for connecting Belimo regulating actuators via the MP-Bus (a Belimo company product). The module makes it possible to connect... TCL2 modules OT-1651, a module with 4 analogue outputs The OT-1651 expansion module contains four unipolar analogue outputs. Each can be used either as a voltage or a current output. Both types of loads are... TCL2 modules IT-1602 module for the measurement of thermocouples and mV signals The module is not recommended for new installations, its successor is IT-1605 The IT-1602 expansion module contains 8 analogue inputs with a common terminal... TCL2 modules MT-1691 submodule with resistors for powering passive sensors (for IT-1601) The R resistors for powering passive sensors do not have to be obtained and manually fitted in the application; the ready-to-use MT-1691 module can be... TCL2 modules Pt100 sensors connected by three wires to the IT-1604 module If a 3-wire Pt100 measurement is required (reducing the influence of the sensors supply cable resistance), external 7K5 resistors can also be used... TCL2 modules IT-1604, a module of universal analogue inputs The IT-1604 expansion module has substituted the previous IT-1601 module. The module contains 8 analogue inputs with a common terminal and 2 analogue... … 11 12 13 14 15 16 17 18 19 …