Foxtrot basic modules Communication interface CH2 ÷ CH4, using multiple submodules If more communication channels with interfaces are needed (up to 4 RS-232, RS-485 communication channels), the submodules fitted with three communication... DHW Heating, PV, EV charging Sample estimate of the minimum consumption of a house in the event of a power failure For the design of battery storage with the requirement to back up at least the minimum required part of the house installation for the required time, the... DHW Heating, PV, EV charging Example of energy gains of a 3 kWp PV plant The following example shows the expected profits from PV panels in the case of optimal installation, the table shows roughly the daily and monthly output... DHW Heating, PV, EV charging FVE, HFVE basic components Battery We store energy storage for storing surplus PV production, to ensure energy in the event of a grid failure, etc., using a stationary battery. Battery... DHW Heating, PV, EV charging Hybrid system with charger and inverter Hybrid connection with connected PV modules via DC / DC battery charger and DC / AC inverter connected to the battery. Phase L1 is led to the non-backed... DHW Heating, PV, EV charging Hybrid system, AC PV coupling Basic version of HFVE using a hybrid inverter and connected PV panels with AC connection via a standard grid inverter - also suitable for existing PV plants.... DHW Heating, PV, EV charging Hybrid system, DC PV coupling Basic version of HFVE using a hybrid inverter and connected PV panels with DC / DC connection via a charger (MPPT tracker) to the backup battery. The L1... DHW Heating, PV, EV charging Grid PV (grid-tie, on-grid) The most common version of a PV plant, which consists of its own PV panels and a grid inverter, which is connected directly to the grid distribution at... DHW Heating, PV, EV charging Basic variants of PV, HFVE solutions Wiring examples, various solutions, sample examples of PV, HFVE Heating, ventilation The inVENTer decentralized heat recuperation ventilation unit The module is no longer for sale The C-VT-0102B module is intended for powering and controlling up to two independent inVENTer ventilation units. The... … 5 6 7 8 9 10 11 12 13 …